RIMINI DP
54 A73021552
EN
4. MOUNTING
The electric radiator shall be fixed to the wall by the adjustable brackets supplied with the radia-
tor, using the template printed on the box.
If for any reason the template is missing, you can follow the instructions below:
1. Make sure you keep your eye on where the lower hole on the wall is.
Model
Dimensions (mm)
No.
brackets (*)
A B
RIMINI DP 50
160 80
2 + 1
RIMINI DP 75
240 160
RIMINI DP 100 320 160
RIMINI DP 120 400 240
RIMINI DP 150
560 320
(*) The first number corresponds to the number of plastic brackets on which the radiator hangs, and the
second number corresponds to the number of metal locking brackets which fixes the radiator to the wall.
2. Screw in each of the brackets using the lower hole and mark the upper holes of each
wall bracket.
3. Drill all the marked locations in the wall and
insert the wall-plugs, screw the brackets to the
wall and hang the radiator.
4. Metal locking bracket: Tighten the screw at the top of the bracket until radiator is
locked in position.
To Next Page
Loading...
Need help?
General
