Careful maintenance and protection of this product is very important to prolong
the service life of the product and reduce the failure.
Do not over-expose the product to direct sunlight or place it near an air
conditioner or in an extremely hot place.
Priority first check the instructions of the software you are using or consult the
customer service personnel of the software manufacturer. If there is no special
operation, you can refer to the following steps:
1. This product supports wireless Bluetooth MIDI data transmission function.
2. Turn on the power of the piano, the default Bluetooth automatically open and
enter the pairing state.
3. Turn on the computer/mobile phone/tablet Bluetooth, search for Bluetooth
devices, and connect to the MIDI Bluetooth device with the name [Piano-MIDI].
4. After successful pairing, you can transmit MIDI data via wireless Bluetooth.
PRECAUTIONS
LOCATION
Avoid heat, moisture or direct sunlight.
This product may be subject to interference and abnormal sounds. If this occurs,
remove the instrument from the TV or radio.
Do not use it near a television or radio.
Clean the product with a soft cloth dampened with water, soaked in the solution
and wrung out until it is nearly dry.
Do not use paints, thinner or similar chemicals for cleaning.
The product should be placed carefully and gently when moving, and violent
vibration and collision are strictly prohibited, so as not to break the shell or
damage the internal electronic components.
Avoid placing this product in the following places, otherwise there is a risk of fire
or electric shock
1.High temperature or dusty places
2.Kitchens or other places where there is grease and smoke
3.Places exposed to direct sunlight, or any other place where the product may
be exposed to high temperatures.
Do not shake, avoid collision
If the stand is not assembled correctly, it may tip over, causing the product to
fall and posing a risk of injury. Therefore, it is important to follow the
instructions in the accompanying manual to ensure that the product is
correctly mounted on its stand.
Proper assembly of the stand
Do not place heavy objects on this product as this may overload the top of the
product, causing it to tip over or cause objects on it to fall, posing a risk of
injury.
Do not place heavy objects
Do not disassemble or modify the product in any way. Otherwise, there is a risk
of electric shock, burns or other personal injury.
Prohibition of disassembly and modification
11
12
To Next Page
Loading...
