Festo CPX-FVDA-P2 User Manual

Description
Output module
CPX-FVDA-P2
with
connection block
CPX-M-AB-4-M12X2
-5POL
or
CPX-AB-8-KL-4POL
and
interlinking block
CPX-M-GE-EV-FV
8022607
en 2018-02a
[8063230]
Terminal CPX
Output module CPX-FVDA-P2

Festo CPX-FVDA-P2 Specifications

General

Electrical Isolation	Yes
Reverse Polarity Protection	Yes
Number of Valve Slices	8
Protection Class	IP65
Short Circuit Strength	Yes
Ambient Temperature	0 °C - 50 °C
Storage Temperature	-20 °C - 70 °C

Summary

System Overview CPX-FVDA-P2

PROFIsafe

Explains the PROFIsafe safety profile and its implementation.

Mode of Operation of the Output Module

Installation

General Installation Instructions

Connecting the Cables and Plugs to the Connection Block

Details the process of connecting cables and plugs to the connection block.

Set PROFIsafe Address

Describes how to set the PROFIsafe address for module identification.

Commissioning

General Instructions

Preparing for Commissioning

Details the necessary checks and preparations before commissioning.

Commissioning Steps

Outlines the procedures for configuring, programming, and testing the system.

Setting the PROFIsafe Parameters

Explains the PROFIsafe-specific parameters and their settings.

Setting the CPX Module Parameters

Details the CPX module parameters and their presetting options.

Configuration with Siemens STEP 7 (Example)

Operation

Diagnosis and Error Handling

Possible Error Messages of the Output Module CPX-FVDA-P2

Details potential error messages and their corresponding handling procedures.

Diagnostics via LEDs