Need help?Do you have a question about the Festo CP-E08-M8-CL and is the answer not in the manual?
General| Input Voltage | 24 V DC |
|---|---|
| Number of Inputs | 8 |
| Number of Outputs | 8 |
| Output Current per Channel | 0.5 A |
| Total Output Current | 4 A |
| Output Type | PNP |
| Connection Type | M8 |
| Short-circuit strength | Yes |
| Reverse polarity protection | Yes |
| Mounting Type | On DIN rail |
Guide to configuring CPI systems using modular valve terminals and I/O modules.
Explanation of how CPI/CP systems function with masters, valve terminals, and I/O modules.
Guidelines on module limits, string configurations, and master compatibility for CPI systems.
Explains addressing schemes for CPI/CP masters, considering extended functions.
Overview of digital input module functions, types, and connectivity.
Methods for diagnosing input module status and faults.
Interpretation of status LEDs for CP communication and sensor supply on input modules.
Guidelines for connecting sensors to CPI input modules, emphasizing cable types and protection.
Procedures for connecting EL input modules to the CP string, including cable specifications.
Requirements for external load supply (24V) for the CP-A08-M12-EL-Z output module.
Instructions for connecting actuators to EL output modules, including pin allocation.
Procedures for connecting EL output modules to the CP string, focusing on cable types and data transfer.
Methods for diagnosing EL output module status and faults.
Interpretation of status LEDs for CP communication and load supply on EL output modules.
To Next Page