Festo CP-E08-M8-CL - A.1 Technical Specifications

A. Technical appendix
A−3
Festo P.BE−CPEA−CL−E N en 0711a
A.1 Technical specifications
A.1.1 General technical data
General technical specifications of the CPI/CP I/O modules
Temperature range:
 Operation
 Storage/transport
−5
o
C ... +50
o
C
−20
o
C ... +70
o
C
Relative air humidity 95%, non−condensing
Protection against electric shock as per
EN 60204−1/IEC 204 (protectionagainst
direct and indirect contact)
Via connection to a PELV (Protected Extra−Low
Voltage) power supply unit
Electromagnetic compatibility
 Interference emission
 Interference immunity
See declaration of conformity
è www.festo.com
Vibration and shock
 Vibration
 Shock
Tested as per DIN/IEC 68/EN60068 part 2−6;
0.35mm path at 10...60 Hz;
5g acceleration at 60...150Hz
Tested as per DIN/IEC 68/EN 60068 part 2−27;
±30 g at 11ms duration; 5 shocks in each direction
Tab.A/1: Technical specifications of CP I/O modules (general)