Festo CP-E08-M8-CL - Installation

2. Input modules types CP−E08−M...−CL and CP−E16−KL−CL
2−8
Festo P.BE−CPEA−CL−EN en 0711a
2.3 Installation
Warning
Sudden unexpected movements of the connected actua
tors and undefined switching states of the electronics can
cause injury to human beings and damage to property.
Before carrying out installation and maintenance work,
switch off the following:
 the operating and load voltage supply on the CP master
(e.g.CPI/CP field bus node)
 separate power supplies
Warning
Incorrect or missing earthing measures can cause interfer
ence due to electromagnetic influences.
Connect the earthing cable on the housing (screw under
type plate, see Fig.2/1, Fig.2/2 or Fig.2/3) at low impe
dance (short cable with large diameter) to the earth poten
tial.
A suitable cable clip is supplied with the module.