Festo CP-E08-M8-CL User Manual

4. Input modules type CP−E16−M...−EL and CP−E32−M8−EL
4−14
Festo P.BE−CPEA−CL−EN en 0711a
4.4.2 Connect the input module to the CP string
Caution
Fault in data transfer on the CP string.
Note the maximum permitted string lengths in the manual
for the CPI/CP master used.
You will then avoid faults in data transfer between the
input module and the CPI/CP master.
Caution
Functional damage
Note the maximum permitted string lengths in the manual
for the CP master used.
Use only the intended original cable type KVI−CP−3−... from
Festo for connecting the CP modules, see manual for the
CP master used.
Note
Specifications on the current consumption of the different
CP modules can be found in the relevant manuals.
The following functions are provided for the module via the
CP cable:
 Operating voltage for internal electronics
 Connection for data exchange
 Operating voltage for the connected sensors

Festo CP-E08-M8-CL Specifications

General

Brand	Festo
Model	CP-E08-M8-CL
Category	Control Unit
Language	English