Festo CP-E08-M8-CL - Connect the Output Module to the CP String

5. Output module type CP−A08−M12−EL−Z
5−11
Festo P.BE−CPEA−CL−E N en 0711a
Note
When switching inductive loads, be sure to use a suitable
safety circuit (e.g. free−whiling diode).
5.4.3 Connect the output module to the CP string
Caution
Fault in data transfer on the CP string.
Note the maximum permitted string lengths in the manual
for the CP master used.
You will then avoid faults in data transfer between the
input module and the CP master (e.g. CP fieldbus node).
Caution
Functional damage
Note the maximum permitted string lengths in the manual
for the CP master used.
Use only the intended original cable type KVI−CP−3−... from
Festo for connecting the CP modules, see manual for the CP
master used.
Note
Specifications on the current consumption of the different
CP modules can be found in the relevant manuals.