Festo CP-E08-M8-CL - A.6 Accessories

A. Technical appendix
A−27
Festo P.BE−CPEA−CL−E N en 0711a
A.6 Accessories
A.6.1 General accessories
Acces
sories
Type Description
ISB−8x20 64 identification signs 8 x 20
ASCF−H−E2 10 inscription labels for CP−EL modules approx. 24 x 60 mm
FLANSCHDOSE
SER.712
 Protective caps for sealing unused CP connector sockets
A.6.2 Accessories for modules with M12 connection
Acces
sories
Type Description
SEA−G−S−7
SEA−4GS−7−2,5
SEA−GS−9
SEA−GS−11−DUO
M12 plug for connecting sensors and actuators, straight, 4−pin
 PG7 screw connector, for cable diameter 4 ... 6 mm
 PG7 screw connector, for cable diameter 2.5 ... 2.9 mm
 PG9 screw connector
 PG11 screw connector, 2 cable exits (DUO)
SEA−M12−5GS−PG7
SEA−5GS−11−DUO
M12 plug for connecting sensors and actuators, straight, 5−pin
 PG7 screw connector
 PG11 screw connector
KM12−DUO−M8−GDGD
KM12−DUO−M8−GDWD
KM12−DUO−M8−WDWD
DUO cable with 2 M8 plugs for modules with M12 connection:
 straight/straight
 straight/angled
 angled/angled