To Next Page
S
Stephanie WilliamsJul 26, 2025
What to do if Festo Industrial Electrical valve or pneumatic system does not react?
- CCharles Martin PhDJul 27, 2025
If your Festo Industrial Electrical valve or pneumatic system isn't responding as expected, or not at all, there are several things you can check: * First, examine the installation of the tubing lines and the electrical cables. * Ensure the detenting manual override is in its initial position. * After restarting, verify the operating pressure for each pressure zone, and set it according to Chapter 3 instructions. * For valve terminals using external pilot air, check the pilot pressure after restarting and adjust it as needed, referring to Chapter 3 if necessary.
General
