9
Health hazard by dust
WARNING!
Various dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known (to the State of California) to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically treated
lumber.
The risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust
masks that are specially designed to filter out micro-
scopic particles. Wash hands after handling.
Technical data
WARNING
TO REDUCE THE RISK OF INJURY, USER MUST
READ INSTRUCTION MANUAL.
Dust extractor CT 26 E, CT 36 E, CT 48 E
Power consumption (dust extractor only) 2.9 - 8.3 A (350 - 1000 W)
1
.)
Total connected load max. 12 A (1440 W)
Max. rating of connected Power Tool 3.7 A
2.)
Volume flow (air), turbine max. 234 m³/h (8264 cu.ft./h)
Vacuum, turbine max. 24000 Pa
Filter surface 6318 cm² (979.3 sq.in.)
Suction hose (diameter x length) 27 mm x 3.5 m (1-1/16" x 11.5’)
Protection type IP X4
Sound pressure level as per IEC 60704-2-1 71 dB(A)
Container capacity CT 26 E 26 l (6.9 gal.)
CT 36 E 36 l (9.5 gal.)
CT 48 E 48 l (12.7 gal.)
Dimensions L x W x H CT 26 E 630 x 365 x 540 mm
(24.8" x 14.4" x 21.3")
CT 36 E 630 x 365 x 596 mm
(24.8" x 14.4" x 23.5")
CT 48 E 715 x 392 x 680 mm
(28.1" x 15.4" x 26.8")
Weight CT 26 E 13 kg (28.7 lbs)
CT 36 E 14.4 kg (31.8 lbs)
CT 48 E 16.3 kg (35.9 lbs)
1.
) 8.3 A (1000 W) is the medium value for different operation conditions, a maximum power consumption of 10 A (1200 W) is possible.
2.
) When the suction power adjuster [1-7] is adjusted to the lowest suction power (see page 12, chapter Settings - Adjusting the suction
power) the maximal rating of a connected power tool can be 9.1 Amps.
To Next Page
Loading...
