Festool CT 26 E HEPA - After finishing work

15

Fold over the lever [9-3] and remove the retain-
er [9-2] .
 Remove the used main filter [9-1] and replace
with a new one.
 Dispose of the used main filter in accordance
with statutory regulations.
 Insert the retainer [9-2] and fold over the lever
[9-3] until it engages.
 Replace the top section [2-1] and close the
locking clips [2-2] .
After finishing work
 Switch off the mobile dust extractor and discon-
nect the plug.
 Wind up the mains power cable.
 Empty the dust container.
9-1
9-3
9
9-2
1
2
3
5
4