6
Safety rules
General safety rules
Read and understand all in-
structions. Failure to follow all instruc-
tions listed below may result in electric
shock, fi re and/or serious personal in-
jury.
SAVE THESE INSTRUCTIONS
Table of contents
Safety rules 6
Tool description 8
Technical specifi cation 8
Symbols 8
Intended use 8
Functional description 8
Setup 9
Setting up a new Domino Joiner 9
Setting the Fence Angle 9
Setting the Fence Height 9
Setting the Mortise Width 10
Setting the Mortise Depth 10
Changing the Mortising Bit 11
Operation 11
Plug it Power Cord 12
Turning on the Joiner 12
Extension Cable 12
Dust Extraction 12
Using the stop latches 13
Side stop with extension 13
Working with the machine 13
Overview, General Notes and Tips 13
Joining - Procedure 14
Maintenance 15
Fixing the clamp lever 16
Changing the stop latches 16
Calibrating the Horizontal Position
Gauge 17
Accessories, Tools 17
Warranty 18
Applications 18
Troubleshooting 22
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of fl ammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the out-
let. Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodifi ed plugs
and matching outlets will reduce risk of elec-
tric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the infl uence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
To Next Page
Loading...
