Need help?Do you have a question about the Festool VS-600 and is the answer not in the manual?
General| Max Workpiece Thickness | 60 mm |
|---|---|
| Dust Extraction Connection Diameter | 27/36 mm |
| Compatible Router | OF 1010, OF 1400 |
| Idle Engine Speed | 5200 min⁻¹ |
| No-load Speed | 5200 rpm |
Focuses on achieving a perfect drawer, box, or cabinet quickly and easily using the VS-600.
Defines a perfect drawer and sets the goal of achieving it rapidly with the VS-600 system.
Explains the core components of the VS-600 system: base unit, templates, guide bushing, and cutter.
Introduces the two half-blind dovetail templates (SZ-14, SZ-20) and their naming convention.
Details SZ-14 template for 15-20mm stock, its corresponding cutter, and shank diameter.
Details SZ-20 template for 21-28mm stock, its corresponding cutter, and specifications.
Details the necessity of jointers and planers for preparing solid wood to prevent warp, cup, and twist.
Explains how to cut drawer components to size, emphasizing the importance of height for centered dovetails.
Guides on the process of cutting half-blind dovetails using the VS-600 jig.
Provides a concise, step-by-step guide for creating perfect half-blind dovetail drawers with the VS-600.
Details the process for cutting male fan shaped tails (usually for drawer sides) using the VS-600.
Guides on cutting female recesses and pins for through dovetails using the VS-600.
Provides instructions for the initial one-time setup of VS-600 templates for precise joint cutting.
To Next Page