Need help?Do you have a question about the Festool CONTURO and is the answer not in the manual?
General| Power consumption | 1200 W |
|---|---|
| Edge height | 18-65 mm |
| Edge thickness | 0.5-3.0 mm |
| Melting temperature | 100-210 °C |
| Weight | 7.9 kg |
| Inside radius | > 50 mm |
| Heating time | 8 min |
| Feed speed | 2/4 m/min |
| Dust extraction connection diameter | 27 mm |
Prepare the workpiece correctly for a perfect edge finish using various cutting methods.
Configure necessary settings on the CONTURO and prepare the edging material before operation.
Learn to attach edging to workpieces using the CONTURO in a mobile setup, including curves and corners.
Utilize the CONTURO as a stationary unit for affixing edging to straight, angled, or shaped edges.
Apply finishing touches to edges after gluing and trimming, including smoothing, corner finishing, and polishing.
Guidance on setting up a VAC SYS workstation for optimal working height and accessibility.
Instructions for adapting the VAC SYS to the MFT for improved user experience and functionality.
Information on connecting and using a Festool mobile dust extractor with the CONTURO for a cleaner workspace.
To Next Page