1 2
3
4948
3
Cleaning the corners is particularly
important. If the edge is routed and
not reworked, a slight overhang
usually remains, which must be
removed. We recommend you use
Festool Brilliant 2 sandpaper, with
P320 grit to remove any significant
unevenness.
Using a sanding cloth after this
will help produce a semi-matt
finish which is smooth and even.
Once the radius on the edge is
perfect, the edge should be
cleaned. Use a plastic cleaner
– edging manufacturers will rec-
ommend a compatible cleaner.
Corner finish
Cleaning edges
2014_FES_EN_CONTURO.indb 49 11.12.13 11:51
To Next Page
Loading...
