1 12 2
3 34 4
2524
3
Selecting and cutting edging to the correct length
You should add approx. 10 cm to the length of the edging.
EDGING OVER 1.5 M IN LENGTH Page 31
If the edging is longer than 1.5 m, it is more convenient
to work with the edging holder.
Select the edging height according to the thickness of the
prepared panel material and include an overhang of approx.
4 mm.
Simply score the edge band (plastic side) with a knife to
ensure a clean separating cut.
It is then easy to break off.
2014_FES_EN_CONTURO.indb 24 11.12.13 11:51
To Next Page
Loading...
