Festool CONTURO - The CONTURO Glue Application System; The Correct Temperature; The Perfect Glue Supply in Line with the Material

61
60
5
The glue is applied to the edge band through a nozzle for greater precision, guaranteed clean edges
and narrow joins. The glue dosage is adapted automatically to the preset edging height. The “remaining
edge length” indicator on the display shows how many metres of edging can be affixed with the current
settings. Additionally, you always know whether you need to insert additional glue cartridges, which is
important because it is not possible to insert cartridges during the gluing process.
When applying glue to porous materials such as chipboard, it is advisable to increase the flow of glue. Simply
press the mode button in the display menu until the value you wish to change flashes. Use the arrow buttons
to change the value and press OK to confirm. The remaining edge length is recalculated automatically in line
with the new preset glue quantity.
The CONTURO has two temperature settings:
Setting 1 = 190 °C for natural coloured glue
Setting 2 = 200 °C for white glue
The perfect glue supply in line with the material
The correct temperature
The glue application system on the CONTURO
2014_FES_EN_CONTURO.indb 61 11.12.13 11:51