Festool CONTURO User Manual

1 52 6
43
4544
3
In order to attach edging to shaped parts, you may have to partially unscrew the guide plates otherwise they
could prevent you from turning and guiding the workpiece along the CONTURO, depending on the shape.
Stationary attachment of edging to small shaped parts
Place the workpiece on the guide rail adapter and guide evenly
past the CONTURO. Loop the edging over the black guide pin
so that it does not obstruct the working area.
The edging is glued as already described.
TIP If you have to unscrew all the guide plates, simply attach
them to the underside of the shaped part using double-sided
adhesive tape. This ensures the part is at the correct height
in relation to the edge bander or edge band, and also that
the correct amount of edging is overhanging.
Your mitred edge is quick and easy to glue.
2014_FES_EN_CONTURO.indb 45 11.12.13 11:51

Festool CONTURO Specifications

General

Power consumption	1200 W
Edge height	18-65 mm
Edge thickness	0.5-3.0 mm
Melting temperature	100-210 °C
Weight	7.9 kg
Inside radius	> 50 mm
Heating time	8 min
Feed speed	2/4 m/min
Dust extraction connection diameter	27 mm