9
1 2
43
5352
3
When working with the CONTURO, dust or foreign matter on the surface of the panel may leave scratches
on particularly delicate surfaces. We reccomend you use the scratch protector with felt pad available as an
accessory from Festool, to prevent any damage.
High-gloss edging
Change the base runner on the underside of the support base
by removing the four screws. Then secure the guide plate on
the LAS-STF-KA 65 scratch protector, which has a Velcro
fastener underneath.
The surface is protected … … and remains free of scratches.
Secure a felt pad to the protector to guarantee ease of
movement over the workpiece.
NOTE The scratch protector includes 3 felt pads,
replacement felt pads are available separately in packs of 10.
2014_FES_EN_CONTURO.indb 53 11.12.13 11:51
To Next Page
Loading...
