1 12 2
4 43 3
6362
5
If the petrol pump symbol appears on the display or there is not enough glue to affix the edging, refill the
machine as follows before starting the next gluing process:
Refilling glue
Press the refill button and wait until the glue feed has moved
back. The display now indicates that the machine is in refill
mode. Wait until the hourglass symbol has disappeared before
opening the flap.
Place the new glue cartridges (of the same colour) into the
magazine.
Lift the flap as soon as the open symbol appears.
Close the flap again and wait until the glue feed moves forward
and exerts pressure on the cartridges. The refill process is now
complete and you can continue working with the CONTURO.
2014_FES_EN_CONTURO.indb 62 11.12.13 11:51
To Next Page
Loading...
