Festool CONTURO User Manual

5
1 2
3 4
2322
3
3.2 Preparing the machine and edge
A few settings must be configured before the CONTURO can be operated. The display on the machine
automatically guides you through the necessary steps.
Preparing the machine
Insert a minimum of two adhesive cartridges before using
for the first time.
CHANGING COLOURS  Page 63
Changing colours, refilling, etc.  Chapter 5
Secure the support base first using the accompanying screw.
You can use the temperature preselection switch to adjust the
temperature according to the colour of the adhesive cartridge
selected.
CORRECT TEMPERATURE
Setting 1 = 190 °C for natural coloured adhesive
Setting 2 = 200 °C for white adhesive
Now press and hold the ON button until the Festool logo
appears on the display.
2014_FES_EN_CONTURO.indb 22 11.12.13 11:51

Festool CONTURO Specifications

General

Power consumption	1200 W
Edge height	18-65 mm
Edge thickness	0.5-3.0 mm
Melting temperature	100-210 °C
Weight	7.9 kg
Inside radius	> 50 mm
Heating time	8 min
Feed speed	2/4 m/min
Dust extraction connection diameter	27 mm