Festool CONTURO User Manual

77
76
7
7. Items included, technical data
CONTURO KA 65 Items included Technical data
Edge bander KA 65 Plus
Edge bander, complete with guide table, 4x natural EVA adhesive,
in a SYSTAINER SYS 4 T-LOC
Edge bander KA 65
Power 1,200 W
Mains frequency 50/60 Hz
Edging height 18 - 65 mm*
Edge thickness 0.5 - 3.0 mm*
Inner radius > 50 mm*
Heating time approx. 8 min
Melting temperature
Default setting
Setting 1 190 °C
Setting 2 200 °C
Melting temperature
Setting range
Setting 1/2 100 – 210 °C
Feed speed 1st gear 2 m/min
2nd gear 4 m/min
Safety class 1
Weight
(without glue cartridges and mains cable)
7.9 kg
* Depending on material
Edge bander KA 65 Set
Edge bander, complete with guide table, 4x natural EVA adhesive,
in a SYSTAINER SYS 4 T-LOC and edge trimming set SYS KB-KA 65,
in a SYSTAINER SYS 4 T-LOC
Edge trimming set SYS KB-KA 65
Edging holder, additional roller, trimming machine, scraper, base runner
scratch protector with 3x felt pad, 5x polishing felt, 20x abrasive sheets
StickFix Brilliant 2 80x133 mm P320, hand sanding block 80x133 mm,
5x StickFix sanding cloth S 800, polish MPA 6000
2014_FES_EN_CONTURO.indb 76 11.12.13 11:52

Festool CONTURO Specifications

General

Power consumption	1200 W
Edge height	18-65 mm
Edge thickness	0.5-3.0 mm
Melting temperature	100-210 °C
Weight	7.9 kg
Inside radius	> 50 mm
Heating time	8 min
Feed speed	2/4 m/min
Dust extraction connection diameter	27 mm