Festool CONTURO - Preparing the workpiece

21
20
3
3.1 Preparing the workpiece
The respective workpiece must be prepared
correctly in order to achieve a perfect edge
finish. Several different options are available
here: cutting to size on a panel saw with a
scoring unit, or using a Festool plunge-cut saw
TS 55 R together with guide rail and splinter-
guard, or even cutting the edge with a Festool
router and guide rail. Whichever system you
choose, the workpiece should be 100 % clean
and splinter-free in preparation for subsequent
attachment of the edging.
PLUNGECUT SAW TS 55 R/
TS 75
ROUTER OF 1400/OF 2200
2014_FES_EN_CONTURO.indb 20 11.12.13 11:51