54
Contents
PAGE
1 The perfect edge. The CONTURO in a system.
10
2 Basic information about CONTURO
14
3 Achieving the perfect edge
18
3.1 Preparing the workpiece 20
3.2 Preparing the machine and edge
Preparing the machine
Display information
Selecting and cutting edging to the correct length
Adjusting the edge height
22
22
23
24
25
3.3 Mobile gluing of edges
Mobile gluing and flush trimming of straight edges
Mobile attachment of edging to shaped parts with curves
Attaching long strips of edging
Mobile attachment of edging to round panels and manufacturing the perfect joint
Attachment of edging to internal corners
26
27
29
31
33
38
3.4 Stationary gluing of edges
Stationary gluing of straight edges
Stationary attachment of edging to mitred workpieces
Stationary attachment of edging to small shaped parts
40
42
44
45
3.5 Edge finish
Routing and smoothing edges flush, trimming overhanging material
Characteristics of routing mitred edges
Corner finishing
Cleaning edges
Sanding and polishing edges
High-gloss edging
46
47
48
49
49
50
53
2014_FES_EN_CONTURO.indb 4 11.12.13 11:51