11
* not on all versions included in the scope of deliv-
ery
Commissioning
Switch on/off
The switch
[1-1]
is an on/off switch (I = ON, 0 =
OFF).
When the battery is empty, or if there is a power
failure or the mains plug is removed, move the
on/off switch immediately to the Off position.
This prevents uncontrolled restarting.
Battery pack
Inserting the battery pack
[2a]
Removing the battery pack
[2b]
Capacity display
Pressing the green button on the capacity display
[1-3]
shows the charge status of the battery pack:
Mains adapter
The mains adapter (available as an accessory de-
pending on the model) combines both cordless and
mains-powered sanding technology, enabling you
to switch between power supply sources. The
mains adapter enables the mobile dust extractor's
automatic electronic switch-on/shut-off function.
For older mobile dust extractors, the automatic
electronic switch-on/shut-off may only be acti-
[1-1]
On/Off switch
[1-2]
Battery pack
[1-3]
Capacity display
[1-4]
Extractor connector
[1-5]
Speed control
[1-6]
Sanding pad
[1-7]
Edge protector
[1-8]
Handle (insulated gripping surface)
[1-9]
Mains adapter with plug-it connection*
[1-10]
Plug-it cable*
[1-11]
Long-life dust bag
70 - 100%
40 - 70%
15 - 40%
< 15%
Recommendation:
Charge battery
pack before further use.
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
To Next Page
Loading...
Need help?
General