12
vated under load and not yet under no-load
speed due to low power consumption.
Insert the mains adapter
[3a]
Connect the mains adapter and plug-it cable
[3b]
Remove the mains adapter
[3c]
Detach the mains adapter from the plug-it cable
[3d]
Settings
Electronics
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Temperature cut-out
To avoid the motor overheating, the power con-
sumption is limited at an excessive motor tempera-
ture. If the temperature continues to rise, the pow-
er tool switches off and can only be switched on
again once the motor has cooled sufficiently.
Constant speed
The preselected motor speed is kept constant
through electronic control. This means that, if the
3a
3b
WARNING
Risk of injury
When working on power tools, always remove
the batteries or disconnect the mains adapter
first.
To Next Page
Loading...
Need help?
General