permissible accessories may result in elec
tric shock and / or serious accidents!
– Protect the battery pack from heat > 50 °C
or constant heat sources such as sunlight
or naked flames.
– Never use water to extinguish burning Li-
ion battery packs; always use sand or a fire
blanket.
– Check the plug and the cable regularly in
order to prevent a hazard. In the event of
damage, these must be replaced by an au
thorised service workshop only.
– Always pull the mains plug out of the sock
et when the charger is not in use.
2.4 Emission levels
Typically, the noise levels that are determined
in accordance with EN 62841 (see EC declara
tion of conformity) are as follows:
Sound pressure level L
PA
= 68 dB(A)
Noise level L
WA
= 79 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Damage to hearing
► Always use ear protection.
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841 (see EU Declaration
of Conformity):
Vibration emission level (3 direc
tions)
a
h
= 3 m/s
2
K = 2 m/s
2
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
loads during operation.
– They represent the primary applications of
the power tool.
Increase possible for other applications, with
other insertion tools or if not maintained ade
quately. Take note of idling and downtimes of
machine!
3 Intended use
The sanders are designed for sanding wood,
plastic, composites, paint/varnish, filler and
similar materials as directed. Metals and mate
rials that contain asbestos must not be pro
cessed.
To guarantee electrical safety, the machine
must not be damp or operated in a damp envi
ronment. The machine must only be used for
dry sanding.
The user is liable for improper or non-in
tended use.
4 Technical data
Cordless random orbit
sander
ETSC 125Li
Voltage 18 - 20 V
No-load speed
6000 - 10000 rpm
Sanding stroke 2.0 mm
Sanding pad D 125 mm
Weight (excl. battery pack,
incl. sanding pad)
1 kg
5 Machine features
[1-1]
On/Off switch
[1-2]
Button for releasing the battery pack
[1-3]
Capacity display
[1-4]
Battery pack
[1-5]
Extractor connector
[1-6]
Speed control
[1-7]
Sanding pad
[1-8]
Edge protector
[1-9]
Handle (insulated gripping surface)
[1-10]
Mains adapter with plug-it connec
tion*
[1-11]
Plug-it cable*
[1-12]
Long-life dust bag
* not on all versions included in the scope of
delivery
6 Commissioning
6.1 Switching on/off
The switch [1-1] serves as an on/off switch (I =
ON, 0 = OFF).
English
17
To Next Page
Loading...
Need help?
General