20
HK 85 EB
GB
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
Portable circular saw designed for sawing
– wooden materials and wood-based materials,
– plaster and cement compoud fibres,
–plastic materials,
– aluminium (only with a special saw blade for alu-
minium offered by Festool)
Only genuine Festool saw blades with the following
specifications may be used: Saw blade diameter
230 mm; cutting width 2,5 mm; location hole
30 mm; recommended standard blade thickness
1,8 mm, max. standard blade thickness 2.0 mm;
suitable for speeds of up to 6600 rpm. Never use
sanding discs in the machine.
The portable circular saw can be transformed into
a biscuit joiner using an adjustable grooving cutter
conversion kit supplied by Festool.
The machine is designed and approved for use by
trained persons or specialists only.
The user is liable for improper or non-in-
tended use.
4Technical data
5 Machine features
6Operation
Always switch the machine off before con-
necting or disconnecting the mains power
cable!
6.1 Switch on/off
Slide switch-on lock
[1-2]
upwards.
Press the ON/OFF switch
[1-7]
.
Press = ON
Release = OFF
Uncertainty K = 1,5 m/s
2
Portable circular saw HK 85 EB
Power output 2300 W
No-load speed 1500 - 3300 rpm
Max. speed
1
4000 rpm
Inclination 0 – 60°
Cutting depth at 0° 0 - 86 mm
Max. cutting depth at 45° 62 mm
Max. cutting depth at 60° 47 mm
Saw blade dimensions 230 x 2,5 x 30 mm
Vibration emission value (3-axis)
Weight (without mains cable) 7,0 kg
Safety class /II
1.
Max. speed in the event of faulty electronics.
[1-1]
Handles
[1-2]
Switch-on lock
[1-3]
Lever for changing blades
[1-4]
Retractor lever for pendulum guard
[1-5]
Guide wedge
[1-6]
Pendulum guard
[1-7]
On/Off switch
[1-8]
Lever for plunge function
[1-9]
Split scale for cutting depth stop (with/
without guide rail)
[1-10]
Rotating extractor connector
[1-11]
Angle scale
[1-12]
Knob for angle setting
[1-13]
Cutting depth adjuster
[1-14]
Adjustable jaws
[1-15]
Mains power cable
[1-16]
Speed control
[1-17]
Insulated gripping surfaces (grey shaded
area)
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the machine’s
name plate.
Observe country-specific regulations.
Portable circular saw HK 85 EB
To Next Page
Loading...
