HK 85 EB
25
GB
12 EU Declaration of Conformity
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following directives, standards and normative
documents:
2006/42/EG, 2004/108/EG (until 19.04.2016), 2014/
30/EU (from 20.04.2016), 2011/65/EU, EN 60745-
1:2009+A11:2010, EN 60745-2-5:2010, EN 55014-
1:2006+A2:2011, EN 55014-2:1997+Corrigendum
1997+A1:2001+A2:2008, EN 61000-3-2:2006+
A1:2009+A2:2009, EN 61000-3-3:2013.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Wolfgang Zondler
Head of Research, Development and Technical
Documentation
2015-07-01
Portable circular saw Series no.
HK 85 EB 768000, 201073
Year of CE mark: 2015
Table 1: Cutting different materials at the appropriate speed
Solid wood (hard, soft)
Plastics, fibre-reinforced plastics (GRP), paper and fabric
Plaster and cement-bonded fibre boards
Aluminium panels and profiles up to 15 mm
Acrylic glass
Chipboard and fibreboard
Laminated wood, blockboard, veneered and coated boards
Material Speed range
6
6
6
3-5
4-5
1-3
4-6
To Next Page
Loading...
