EasyManua.ls Logo

Festool OF 1400 EBQ - 8 Working with the electric power tool; Adjusting Feeler Roller Distance; 9 Service and maintenance; Maintenance Precautions and Support

Festool OF 1400 EBQ
20 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The distance between the feeler roller and
the cutter axis can be adjusted by turning
the adjusting wheel [10-4].
9 Service and maintenance
WARNING
Risk of injury, electric shock
Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
All maintenance and repair work which re
quires the housing to be opened should al
ways be carried out by an authorised serv
ice workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.kr/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.kr/service
EKAT
1
2
3
5
4
The tool is equipped with special self-discon
necting carbon brushes. If they wear out, the
power supply is disconnected automatically and
the tool stops.
Observe the following instructions:
Damaged safety devices and components
must be repaired or replaced in a recog
nised specialist workshop, unless otherwise
indicated in the operating instructions.
To ensure constant air circulation, always
keep the cooling air openings in the housing
clean and free of blockages.
To change the position of the clamp lever [11]
Undo the screw .
Remove the clamp lever and tighten the
hexagon screw.
Put the clamp lever back into the required
position and secure it with a screw.
10 Accessories
Always use original Festool tools and accesso
ries. Using low-quality tools or accessories
from other manufacturers may increase the
risk of injury and seriously unbalance the ma
chine, decreasing the quality of the working re
sults and accelerating power tool wear.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festool.co.kr.
11 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac
cessories and packaging. Observe appli
cable national regulations.
12 Contact us
경기도 의왕시 맑은내길 67, 501-2호
(오전동, 에이엘티지식산업센터)
(우) 16071
전화: 02-6022-6740
팩스: 02-6022-6799
https://www.festool.co.kr
ALT Center A 5F, Malgeunnae-gil 67
Uiwang-si, Gyeonggi-do
16071
phone: 02-6022-6740
fax: 02-6022-6799
https://www.festool.co.kr
English
20

Other manuals for Festool OF 1400 EBQ

Related product manuals