Contents
1 Symbols............................................... 6
2 About this manual............................... 6
3 General power tool safety warnings...
7
4 Intended use........................................9
5 Technical data................................... 10
6 Functional description...................... 10
7 Commissioning..................................10
8 Settings..............................................11
9 Working with the machine................ 13
10 Service and maintenance..................14
11 Accessories....................................... 14
12 Environment...................................... 15
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Safety class II
Read operating instructions and
safety notices!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Switch the power supply on.
Switch the power supply off.
RBRC Seal - LiIon
Tip or advice
Handling instruction
V volts
A amperes
Hz hertz
~ a.c. alternating current
d.c. direct current
n
0
no load speed
Symbol Significance
rpm
min
-1
revolutions per minute
’’ inch
lbs pound
diameter
°C degree centigrade
°F degree Fahrenheit
Nm Newton metre
Ah amps hour
Wh watt hour
2 About this manual
Save these instructions
It is important for you to read and understand
this manual. The information it contains relates
to protecting your safety and preventing prob
lems. The symbols below are used to help you
recognize this information.
DANGER Description of imminent
hazard and failure to avoid
hazard will result in death.
WARNING Description of hazard and
possible resulting injures
or death.
CAUTION Description of hazard and
possible resulting injuries.
NOTICE Statement including nature
of hazard and possible re
sult.
HINT Indicates information,
notes, or tips for improving
your success using the
tool.
English
6
To Next Page
Loading...
Need help?
General