Noise generated when working Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for three directions) and uncertainty K measured in accordance with EN
62841:
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary estimates regarding vibration and noise load during operation.
They represent the primary applications of the power tool.
CAUTION
The emission values may deviate from the specified values. This is dependent on how the tool is used and the type of
work piece being machined.
The actual load during the entire operating cycle must be evaluated.
Depending on the actual load, suitable protective measures must be defined in order to protect the operator.
Intended use
This cordless impact screwdriver is intended for driving in and tightening screws up to the specified maximum
dimensions in metal, wood, plastics and similar materials. Self-tapping drill screws are intended for use in metal.
It must be noted that speed is directly connected to torque. This means: The lower the speed, the lower the torque.
This power tool is intended for use with BP Festool battery packs of the same voltage class.
Warning : The user is liable for damage and accidents caused by improper and non-intended use; this also
includes damage and wear caused by continuous industrial operation.
Technical data
To Next Page
Loading...
Need help?
General
