Unpacking the box
Before you install your
Fetch TV Set Top Box
(STB), check that all the
accessories you need have
been supplied using this
page as a checklist.
You will need:
1 STB Unit
1 Power Adaptor
1 Power Cord (1.5m)
1 Antenna Cable (1.5m)
1 HDMI Cable (1.8m)
1 Remote Control
2 AA Batteries
1 RJ45 Ethernet Cable (2m)
You may not need to use:
1 RYW Composite Cable (1.5m)
You may also have received:
PLC Adaptors, or Wireless Bridge Devices if you
ordered them from your Fetch TV Service Provider
To Next Page
Loading...
