ENGLISH
Compass Espresso Coffee Machine by fiamma – Operating Manual 33
The display shows:
The programming follows this order:
Hour for switching on (aaa = On);
Minute for switching on (aaa = On);
Hour for switching off (aaa = Off);
Minute for switching off (aaa = Off);
Rest day
Use key 5 to navegate between the items.
Use keys 1 (+) and key 2 (-) in order to change the parameters, and key 5 to confirm your settings.
You can set diferente times for Auto-On/Off for each day of the week.
If you do not wish to activate the Auto Power function, the display should show:
If the Auto Power function is deactivated, the machine must be switched on and off manually.
Press key 5 in order to pass to the next item, the Auto-Power function.
7.3.2. REST DAY
The Compass allows you to define a weekly rest day on which the Auto Power function is suppressed
and the machine can only be switched on and off manually. O display mostra:
Press key 1 (+) or key 2 (-) in order to access the selection of the day (XXXXXXX). Press key 5 in order to
pass to the next item.
If you do not wish to set a rest day, select “----------”.
You can only define one rest day per week.
7.4. Reading of Counters
1. With the machine in ON mode, press key 5 of group 1 (leftmost group) and keep it pressed for 5
seconds. Key 5 starts to blink and the display shows the following message
2. Press key 5 and keep it pressed until “Clock ajust” appears on the display.
3. Press key 5 in order to pass to the counters.
4. Press key 3 and the display shows the liters used until the current date.
5. Press key 5 in order to see the number of service cycles until the current
date.
6. Press key 5 in order to see the total number of coffees produced until the
current date.
To Next Page
Loading...
Need help?
General
