FIAMMASTORE
4
1
2
Check that nothing has been damaged or deformed during shipping.
In the event of doubts or questions concerning the installation, use or limitations of the product, contact the
dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current
local regulations.
WINCH REPLACEMENT
Warning: before starting, when the awning is closed, remove the 12 Volt
power supply
Install fasteners or safety belts, or alternatively, keep the lead bar closed with adhesive tape
(removable). The operation of the winch replacement can be carried out either with closed
awning, but with safety fasteners, or with the awning open. We recommend performing
the repair with the awning closed as it makes, the next operations for centring the winch
easier. If adhesive tape is used, position it so that it adheres well to the aluminium (pulling
the lead bar does not move).
To Next Page
Loading...
Need help?
General
