Fiat 500 C - Window Cleaning; Windscreen Wipers

37
WINDOW WASHING
41) 4)
WINDSCREEN WIPERS
fig. 27
The stalk has five different positions
(four speed levels ):
A – windscreen wiper off
B – flick operation
C – continuous slow
D – continuous fast operation
E – temporary fast operation
(toggle position).
WINDSCREEN WIPERS
WITH AUTOMATIC
WIPING
The stalk can be put in four different
positions (fig. 28):
A - windscreen wiper stationary (0)
B - automatic wiping (AUTO)
C - slow continuous operation (LO)
D - fast continuous operation (HI)
E - temporary fast operation (unstable
position).
When passing directly from position B
to position E, the stalk returns to
position A when it is released.
28
DVDF0S0229
“Smart washing” function
Pull the stalk towards the steering
wheel (unstable position) to operate the
windscreen washer. Keep the lever
pulled to activate both the windscreen
washer jet and the windscreen wiper
with a single movement; the latter turns
on automatically if you keep the lever
pulled for more than half a second.
The operation of the windscreen wiper
terminates several strokes after the
stalk is released; a final cleaning stroke
several seconds later completes the
wiping operation.
REAR WINDOW WIPER
41) 4)
❒ Turn ring A fig. 29 from the O
position to the (rearscreen wiper
symbol) position, the rearscreen
wiper operates as follows:
❒ in intermittent mode when the
windscreen wiper is not operating;
❒ in synchronous mode (at half the
speed of the windscreen wiper)
when the windscreen wiper is
operating;
❒ in continuous mode with reverse
gear engaged and the control
active.
27
E
A
B
C
D
DVDF0S009c