39
ROOF
10) 5)
FIXED GLASS ROOF
(for versions/markets, where provided)
The large glazed roof includes a
transparent panel provided with
manually operated blinds. The blinds
can be used in the “all closed” or “all
open” positions (there are no
fixed intermediate positions).
❒ To open the blind: grip the handle
and press the catch A-fig. 31, then
release the blind and bring it to the
“all open” position.
To close it, repeat the same
operation in the opposite direction.
SUNROOF
(for versions/markets, where provided)
To move the blinds, follow the
instructions in “fixed glass roof”
Opening the sunroof
❒ Keep the button A-fig. 32 pressed:
the sunroof will move to “spoiler”
position.
To fully open the sunroof press
button A again and hold it down: the
sunroof will stop in the position
reached when the button is
released.
32
DVDF0S018c
Closing the sunroof
❒ Keep the button B-fig. 32 pressed:
the sunroof will move to “spoiler”
position.
The sunroof will stop in the position
reached when the button is
released. Press button B again and
hold it down until the sunroof is
completely closed.
Anti-pinch device
❒
The sunroof has an anti-pinch safety
system capable of detecting the
presence of an obstacle whilst the
sunroof is closing. When this
happens, the system stops and the
movement of the sunroof is
immediately reversed.
Initialisation procedure
The sunroof must be re-initialised after
disconnecting the battery or if the
relevant protection fuse is blown.
Proceed as follows:
❒ keep the button A fig. 32 pressed
so that the sunroof closes
completely in stages
❒ after full closing, wait for the sunroof
motor to stop.
31
DVDF0S017c