High Beams
To turn on the high beam headlights, push the turn signal lever forward (toward t he front
of the vehicle) and an indicator will illuminate in the cluster. To turn off the high beams,
pull the turn signal lever rearward (toward the rear of the vehicle).
NOTE:
The headlights must be on for the high
beams to activate.
Turn Signals
Move the multifunction lever up or down
and the arrows on each side of the instru-
ment cluster flash to show proper opera-
tion of the front and rear turn signal lights.
When the Daytime Running Lights are on
and a turn signal is activated, the Daytime
Running Lamp will turn off on t he side of
the vehicle in which the turn signal is flash-
ing. The Daytime Running Lamp will turn
back on when the turn signal is turned off.
High Beam And Turn Signal Controls
1 — Turn Signals
2—HighBeamHeadlights
3 — Flash To Pass
4 — Lane Assist
OPERATING YOUR VEHICLE
38
To Next Page
Loading...
