Air Recirculation
• Use Recirculation for maximum A/C operation.
• For window defogging, turn the recirculation off.
• Recirculation is not allowed in defrost, floor, defrost/floor (mix) modes.
Max Defrost
• Push the MAX Defrost button to change the current airflow setting to Defrost mode.
Performing this function will cause the ATC to change to manual mode, the blower
speed will increase to full, the A/C compressor is turned ON, the temperature controls
are set to (HI), defrost mode is selected, rear defroster is turned ON, and the air re-
circulation is turned OFF.
• If the MAX Defrost mode is turned OFF, the climate system will return to the previ-
ous setting.
SYNC
• Push the SYNC button to synchronize the passenger temperature setting with the
driver temperature setting.
• Changing the passenger temperature setting while in Sync will automatically exit this
feature.
Mode Buttons
• The airflow distribution modes can be adjusted so air comes from the instrument
panel, floor, de-mist, and defrost outlets. One, two or all modes may be selected at any
one time.
Heated Mirrors
• The mirrors are heated to melt frost or ice. This feature is activated whenever you
turn on the rear window defroster.
OPERATING YOUR VEHICLE
47
To Next Page
