Fiat 500x 2016 - Automatic Temperature Controls (ATC)

Deactivation
A soft tap on the brake pedal, pushing the CANCEL button, ESC intervention, Forward
collision mitigation, Electronic Park Brake Intervention, or normal brake pressure while
slowing the vehicle will deactivate the Speed Control without erasing the set speed from
memory.
Pushing the ON/OFF button or turning the ignition switch OFF erases the set speed
from memory.
Resume Speed
To resume a previously set speed, push the RES button and release. Resume can be used
at any speed above 20 mph (32 km/h).
Varying The Speed
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the SET + button.
The drivers preferred unit s can be selected through the Uconnect system if equipped.
The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or
Metric (km/h):
U.S. Speed (mph)
• Pushing the SET + button once will result in a 1 mph increase in set speed. Each sub-
sequent tap of the button results in an increase of 1 mph.
• If the button is continually pushed, the speed will continue to increase until the button
is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET + button once will result in a 1 km/h increase in set speed. Each sub-
sequent tap of the button results in an increase of 1 km/h.
• If the button is continually pushed, the speed will continue to increase until the button
is released, then the new set speed will be established.
To Decrease Speed
When the Speed Control is set, you can decrease speed by pushing the SET - button.
The drivers preferred unit s can be selected through the Uconnect system if equipped.
The speed increment shown is dependant on the chosen speed unit of U.S. (mph) or
Metric (km/h):
U.S. Speed (mph)
• Pushing the SET - button once will result in a 1 mph decrease in set speed. Each sub-
sequent tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the speed will continue to decrease until the button
is released, then the new set speed will be established.
OPERATING YOUR VEHICLE
44