26 Capron - 04-17 - CAP-0017-01EN
Before the journey
4
Emergency operation If the electric drive of the entrance step fails, follow the directions below to
manually retract the entrance step:
Pull out the securing splint from the connection to the engine.
Release the rectangular connection to the engine using a suitable object
(e.g. a screwdriver).
Push in the entrance step by hand and secure it using a suitable device
(e.g. a string).
Contact customer service.
4.5 Roman shade for windscreen and side panes
Securing Roman shade
(windscreen):
Push the respective handle (Fig. 2,1) of both halves of the Roman shade
(Fig. 2,2) outwards, underneath the cover on the A column.
Fix the handles respectively by plugging them onto the cover (Fig. 2,3).
Thus, the windscreen shade is secured against closing involuntarily during
the journey.
Securing Roman shade
(side panes):
Push the handle (Fig. 3,1) of the Roman shade into the cap (Fig. 3,2).
Thus, the Roman shade is secured against closing involuntarily.
4.6 PVC-floor covering
Fig. 2 Roman shade for windscreen
(closed)
Fig. 3 Roman shade for side pane
(closed)
X Gas pipes and electric lines are laid in the floor. Never drill holes in the
floor or insert any screws. That could cause a gas explosion, an elec-
trical shock or a short circuit due to damage to a cable.
Z Shoes with pointed heels can leave permanent impressions in the PVC-
floor covering. Never wear shoes with pointed heels in the vehicle.
Z Rubber mats or long exposure to ketchup, carrot juice, ink, blood or lipstick
can discolour the PVC-floor covering. If possible, remove stains from the
floor immediately.
To Next Page
Loading...