IDENTIFICATION
DATA
It is advisable to take note of the
identification codes. Identification codes
are printed and shown on the plates
as indicated below, together with the
positions:
VIN plate.
Chassis marking.
Bodywork paint identification plate.
Engine marking.
VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE
This plate is fitted to the engine
compartment front crossmember and
contains the following data fig. 195:
A
Name of manufacturer.
B
Type-approval number.
C
Vehicle type identification code.
D
Chassis serial number.
E
Maximum permitted weight of vehicle
fully laden.
F
Maximum permitted weight of vehicle
fully laden plus trailer.
G
Maximum permitted weight on first
axle (front).
H
Maximum permitted weight on
second axle (rear).
I
Engine type.
L
Bodywork version code.
M
Spare part number.
N
Correct value of smoke coefficient
(for diesel engines)
CHASSIS MARKING
These are located respectively: one on
the passenger side interior wheel arch,
A fig. 196, and the other at the bottom
of the windscreen fig. 197.
The marking includes:
type of vehicle;
chassis serial number.
BODYWORK PAINT
IDENTIFICATION PLATE
This plate is fitted to the engine
compartment front crossmember fig.
198 and contains the following data:
A Paint manufacturer.
B Colour name.
C Fiat colour code.
D Respray and touch up code.
195
F1A0243
196
F1A0244
197
F1A0365
198
F1A0369
209
To Next Page
Loading...
