Fiat DUCATO 2023 - Pairing a Mobile Phone

44
CONTROLS BEHIND
THE STEERING WHEEL
(fi g.72)
Button A (steering wheel left side)
Upper button:
 Short press: next radio station
search / next preset (according to
the "Steering Wheel Seek Buttons"
setting) (Radio source), next song
selection (Media source)
 Long button press: scan of higher
frequencies until released/fast
forward of USB track
Central button: With each press it
scrolls through sources AM, FM, USB
Only the available sources will be
selected.
Lower button (volume down):
 Short press: search previous
radio station / previous preset
(according to the "Steering Wheel
Seek Buttons" setting) (Radio
source), select previous song
(Media source)
 Long button press: scan of lower
frequencies until released/fast
forward of USB track
Button B (steering wheel right
side)
Upper button (volume up):
 Brief button press: single volume
increase
 Long button press: fast volume
increase
Central button: function on/off (Mute)
Lower button (volume down):
 Brief button press: single volume
decrease
 Long button press: fast volume
decrease
PAIRING A MOBILE
PHONE
WARNING Only do this with vehicle
stationary and in safe conditions; this
function is disabled when the vehicle
is moving.
To register the mobile phone, proceed
as follows:
 access the Phone “Settings” Menu
 turn the BROWSE ENTER button/
knob to select the "Pair New
Phone" option: a dedicated screen
will appear on the display
The "Settings" Menu can be accessed
by selecting the "Settings" button in
the "Phone" Menu, or by pressing
the "OK" button in the "Phone" Main
Menu (when no mobile phone is
connected).
After the "Pair new phone" pairing
procedure is selected, a pop-up
screen indicating the device name and
a random 4-digit PIN will appear on
the display.
When the name of the vehicle is
selected, if the 4-figure PIN has been
entered into the device correctly, the
display will show a pop-up message
indicating the start of the procedure,
followed by the screen with the
6-figure confirmation code, which
automatically replaces the previous
PIN. The driver must confirm on both
the device and the system.
Once the PIN has been confirmed,
both on the system and the paired
device, the pairing procedure will start.