IDENTIFICATION
DATA
VEHICLE IDENTIFICATION PLATE
The indications given on the plate A
fig. 288 have to be shown in every
written communication or order.
The presence and position of the data
depends on the vehicle fig. 289 –
fig. 290.
Manufacturer's licence plate A fig. 288.
1 Manufacturer’s name.
2 Number of community design or
approval.
3 Identification number.
Depending on the vehicle version, this
information is copied on printout B
fig. 290.
4 MMAC (Max. volume allowed at full
load).
5 MTR (Total kerb weight - vehicle
loaded with trailer).
6 MMTA (Max. total volume allowed)
front axle.
7 MMTA rear axle.
8 Reserved for complementary
registrations.
9 Diesel exhaust emissions.
10 Paint code (colour code).
ENGINE IDENTIFICATION PLATE
(Different position depending on the
engine fig. 291 )
Manufacturer's plate A fig. 292:
1 Engine type.
2 Engine index.
3 Engine number.
288
T35982
289
T36711
290
T36710
291
T36714
292
T33293
185
To Next Page
Loading...
