Installation and Operation Guide
Smoke Sensor Page | 17
05. SMOKE DETECTION
The Smoke Sensor responds to the physical presence of smoke. The Smoke
Sensor performs a self-test every 5 seconds and checks for the presence of
smoke. When smoke is detected, the sensor checks 3 more times at a 1 second
interval to see whether the smoke is actually present. Once the presence of
smoke is confirmed, the Smoke Sensor triggers an alarm and also emits a
constant sound signal along with the LED flashing red.
Once the smoke alarm has stopped, the sensor checks 3 times at a 1 second
interval whether the smoke has actually disappeared before returning to normal
operation mode.
The Smoke Sensor is a multiple use device, however, for greater
safety, it is recommended that the device is replaced with a new one
after a fire has occurred.
To Next Page
Loading...
