FIBARO Smoke Sensor - Adding to Active Smarthome Platform

Installation and Operation Guide
Smoke Sensor Page | 8
03. ADDING TO THE ACTIVE
SMARTHOME PLATFORM
The Smoke Sensor can be added to the Active SmartHome Portal by using
the B-button (fig. 03).
To do this, follow these simple instructions:
1. First, ensure that the Smoke Sensor is near to the Active SmartHome
Gateway, as the process can ONLY be carried out within the direct range of
the Active SmartHome Gateway.
2. Then open your web browser and access your Active SmartHome Portal.
Figure 03 B-button