FIBARO Smoke Sensor User Manual

Installation and Operation Guide
Smoke Sensor Page | 3
07. TECHNICAL DATA AND INFORMATION
20
Technical Assistance
info@activesmarthome.com
01. INTRODUCTION
The Smoke Sensor is a smart smoke detector with a beautiful and minimalist
design. It is made from high quality materials and is resistant to high
temperatures. It has been designed to rapidly react to the least amount of
smoke. The optical sensor detects smoke at an early stage of a fire, often before
any flames appear and before the temperature starts to rise significantly around
it.
Our product is extremely easy to install in any location where a fire may occur.
The alarm is signaled by sound and a LED, it can be battery-operated or VDC
powered. The smoke sensor carries out an automatic efficiency test every 5
seconds. The Smoke Sensor is designed to be placed on a wall or ceiling.

FIBARO Smoke Sensor Specifications

General

Sensor Type	Photoelectric
Battery Type	CR123A
Wireless Technology	Z-Wave
Operating Temperature	0°C to 55°C
Dimensions	65 x 28 mm
Alarm Sound Level	85 dB
Radio Frequency	868.4 MHz (EU) / 908.4 MHz (US)
Humidity Range	0% to 93% (non-condensing)
Range	Up to 50 meters outdoors
Sensitivity	EN 14604:2005
Certifications	EN 14604