FIBARO Smoke Sensor User Manual

Installation and Operation Guide
Smoke Sensor Page | 4
The LED indicator warns of a fire in operating mode, and is used to check
whether the device is within the range of the Z-Wave network. The smoke
sensor is designed to operate in confined spaces, under normal conditions (free
from dust or condensed water vapor).
The Smoke Sensor is a universal, optical Z-Wave smoke detector. The device
can be hard-wired (12 or 24 VDC) or battery operated. Smoke detection is
signaled through a sound alarm and a flashing LED. Additionally, the smoke
sensor signal can be sent wirelessly to the Active SmartHome Gateway.

FIBARO Smoke Sensor Specifications

General

Sensor Type	Photoelectric
Battery Type	CR123A
Wireless Technology	Z-Wave
Operating Temperature	0°C to 55°C
Dimensions	65 x 28 mm
Alarm Sound Level	85 dB
Radio Frequency	868.4 MHz (EU) / 908.4 MHz (US)
Humidity Range	0% to 93% (non-condensing)
Range	Up to 50 meters outdoors
Sensitivity	EN 14604:2005
Certifications	EN 14604