FIBARO Smoke Sensor User Manual

Installation and Operation Guide
Smoke Sensor Page | 21
(depending on the terrain and building
structure)
When handled carelessly or used in non-specified environmental
conditions, the device may not function properly. It is highly
recommended that all safety precautions are taken to ensure safety and
the protection of property. Depending on the Smoke Sensor’s internal
conditions (e.g. operational mode, battery discharge, etc.) and on the
installation conditions, this device may not be 100% accurate. However,
it can significantly increase the probability of smoke detection.

FIBARO Smoke Sensor Specifications

General

Sensor Type	Photoelectric
Battery Type	CR123A
Wireless Technology	Z-Wave
Operating Temperature	0°C to 55°C
Dimensions	65 x 28 mm
Alarm Sound Level	85 dB
Radio Frequency	868.4 MHz (EU) / 908.4 MHz (US)
Humidity Range	0% to 93% (non-condensing)
Range	Up to 50 meters outdoors
Sensitivity	EN 14604:2005
Certifications	EN 14604